GIROSIL® EDGE RC-E
Cut Edge Corrosion Treatment
GIROSIL® Edge RC-E is the most technologically capable coating solution used in the treatment of cut edge corrosion in roofs, gutters and cladding. Designed to treat both the top and reverse side of the cut edge in profiled metal roofing through advanced corrosion treatment and encapsulation, GIROSIL® Edge RC-E outperforms traditional silicone based coating solutions. Avoid costly sheet replacement and future proof the protection of your commercial roofing with our market leading GIROSIL® Technology coating solutions.

Fully Moisture Tolerant
Laminar flake technology means GIROSIL® Edge RC-E can be applied in moist conditions, allowing earlier starts and later finishes for your roofing projects.
UV & Temperature Tolerant
GIROSIL® Edge RC-E will comfortably accommodate high levels of UV, having passed over 15,000 hours accelerated QUV long term testing without failure.
Tough Elastic Finish
GIROSIL® Edge RC-E cures to a tough, elastic finish, flexible enough to withstand surface movement. GIROSIL® Coatings cure harder than silicone systems.
BBA Approved and Guaranteed for 15 Years
GIROSIL® Edge RC-E been independently tested and certificated by the British Board of Agrément - Certificate No 20/5772
 Roof Against Clear Blue Sky |
---|
 Martland Roof During I |
---|
 Minimalistic Photography of a Roof |
---|
 roof-waterproofing |
---|
 roof-painting-cost |
---|
 ASDA Washington Cut GIROSIL RC-E |
---|
 man-spraying-a-roof |
---|
 Girosil Rc ULTRA Spray Application Two |
---|
 GIROMAX Cut Edge Corrosion Treatments |
---|
 Martland Gutter Before I |
---|
 metal-roof-coating |
---|
 Martland Roof Before II |
---|
 Martland Gutter During II |
---|
Uniquely, both GIROSIL® Base and GIROSIL® SE Sealant stabilise the substrate using laminar flake technology that seals and bonds with corrosion. Solvent free GIROSIL® Edge RC-E then prevents rainwater re-entering the lap. It can easily accommodate sheet movement and remains unaffected by UV and temperature. Fully moisture tolerant, it can be applied in the wet and hardens to a tough elastic coating with high impact and dirt resistance.